PTFE Sheets

We offer a wide range PTFE Molded Sheet / Skived sheets

Standard Size:

Thickness From 1.5 mm to 100 mm / 300 mm2 / 400 mm2/ 450 mm2 / 500 mm2 / 600 mm2 / 900 mm2 / 1000 mm2/ 1200 mm2

Available Grades:

Virgin PTFE

  • 15 % Peek PTFE
  • 15 To 25 % Glass Filled PTFE
  • 25 To 35 % Carbon Filled PTFE
  • 15 % Graphite Filled PTFE

Special Grade as per customer specification

Teflon Rods, Bushes & Tubes

We can supply Teflon Rods & Bushes as in different sizes as per your requirement. Graphite filled, Glass Filler or Carbon filled as per your specifications

Rods
Dia 3 – 250 (standard) large sizes can made to order
Length 300 – 900 mm (standard)

Tubes
Flexible
I.D. 1.6 – 25 mm
Wall Thickness 0.8 – 1.6 mm
Length 3000 – 12000 mm

Bushes
O.D. 32 – 150 mm (standard)
I.D. 12.5 – 127mm (standard)
Length 100 mm (standard)
upto 300 mm in special cases.
Larger sizes can made to order

Rigid
O.D. 25 -100 mm
I.D. 19 – 89 mm
Length upto 5000 mm
Wall Thickness 3 – 25 mm

Teflon Belows

  • Line Bellows: Nominal bore 25 – 225mm. Bigger sizes as per order.
  • Valve Bellows : Complete with spindles. Nominal bore 25 mm onwards.
  • Stirrer Bellows: Nominal bore 25 mm onwards. These bellows can be supplied with / without steel flanges.

Teflon Universal Rope:

Introduction:

Flex-O-Seal is a unique sealing material manufactured from special grade of expanded 100% pure PTFE by transforming the fibrous structure by means of a special process. Though very tough, it is spongy and suited to almost all flanges, covers and narrow cavities. Its special soft and flexible character enables it to be the most ideal seal under pressure without significant cold flow even on irregular, badly damaged or corroded flange surfaces. Once bolted this gasket rarely need to be re-torqued.

Properties: FLEX-O-SEAL recommended temperature-240°C, to 310°C, PH Range 0-14 No deterioration due to stocking for long time. Resistant to high pressure, non-toxic. Not recommended for use against elemental fluorine, alkali metals and strong oxidizing agents.

Application:
FLEX-O-SEAL is safely used in petroleum refining companies even in their offshore operations, corrosive chemical processing, food processing, paper mill, marine installation, for glass lined or fibre glass reinforced vessels and tank lid sealing, manhole covers, vent pipes, heat exchangers, pumps or compressors housing flanges, valves and many more industrial applications where conventional pre-cut gaskets are not readily available or unsuitable.

Sizes: Contact us for details

Teflon Diaphragms with Neoprene Rubber Pad

Uses: Extensively in Pharmaceutical / Food / Chemical Industry where a high standard of cleanliness and purity is required.

The almost universal chemical resistance, the high temperature resistance, the anti-stick, low friction surface of the PTFE Linings ensure minimum maintenance requirements. Low cost and efficient design along with long service life makes PTFE the most ideal material for use in valve and pump diaphragms.

Sizes: 12 – 250 mm; larger ones on request.

If you would like to know more or would like us to assist you with your requirements please feel free to Contact us.